number of inbound digits

[jcsmith96]

Where can I find the configuration for the number of digits that a CUCM 6.x MGCP

is set as.

[Kenneth Mohammed]

Hello,

Im assuming that you are referring to an MGCP controlled PRI. The significant digits setting will be on the gateway configuration page in CUCM. If you want to verify how many digits the service provider is sending, you need to go into the gateway and issue a "debug isdn q931" and "term mon" to get this info.

Hope that helped, if so please rate.

[jcsmith96]

Thanks

[Kenneth Mohammed]

Anytime, however, don't forget to rate helpful posts.

Hope that helped, if so please rate.