I have a customer with a h323 gateway, 4 analog lines (4 port FXO card), The outside caller will hear 5 rings and the IP phone will only ring once, so the outside caller hears about 10 rings before voicemail will pick but the IP phone rings only 4 ~ 5 times. I have taken off the caller id enable command and changed the ring number to 1 on the voice port but still no change. I would expect maybe 1 to 2 rings but not 5. Debug vpm signal shows the router seeing the call on the first ring.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4