Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Numbering Type

HI,

I have set the numbering type to be unknown for my outgoing dial-peer but when i see the isdn debug i could see the numbering type is national and isdn plan

dial-peer voie 202 pots

numbering-type unknown

destination-pattern 2312144

port 0/1/0:15

forward-digits all

I am using my ip phone to dial a local number. I have created sip trunk and route pattern for 2312144.

The provider expects me to send unknown as numbering type for local calls.

Any suggestions

  • IP Telephony
4 REPLIES
Cisco Employee

Re: Numbering Type

use translation profiles

Number Translation using Voice Translation Profiles

http://www.cisco.com/en/US/customer/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml

Voice Translation Rules

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Hall of Fame Super Gold

Re: Numbering Type

You can set the numbering type under the isdn port:

isdn map address . plan unknown type unknown

New Member

Re: Numbering Type

I have only 1 E1 PRI..if i set this at this isdn port "unknown" would be set for all calls. I want this to be only for local landline calls. This type "unknown" should be set only for local landline calls and for all others national is required (set default by the router). This is the provider's requirement.

Hall of Fame Super Gold

Re: Numbering Type

Hi,

I suggest you try "unknown" for all calls, chances are it will work despite what the SP says. If not, you will need multiple map statements or translation-rule to set different numbering type for each type of call.

413
Views
0
Helpful
4
Replies
This widget could not be displayed.