Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

occasional fax issues

Hello everyone. I wanted to check with you all to see if you have seen an issue I am having. I have several fax machines connected to an fxs module in a CME router. Occasionally, enough to be a bother, you have to reset the fax machines (not all at the same time, it varies to which one it will be), because it will give a busy signal on the line and it doesnt seem to drop the busy signal. I have two different models of xerox fax machines, plus one sharp fax machine. An outside company has recommended that I get analog lines run to the faxes instead of going through the CME. Is there anything I can do to fix this sort of issue?

2 REPLIES
New Member

Re: occasional fax issues

Forgot to attach configuration.

Re: occasional fax issues

There was a bug in SCCP software that caused something very similar to this. I would try upgrading to 12.4(20)T3 or so, and I think that will resolve your problem.

hth,

nick

145
Views
0
Helpful
2
Replies