on cisco side will see "unknown" calling name when MOC(OCS) call.
and when cisco phone call to MOC will see calling number.
on Cisco side i did checked parameter on SIP trunk
1.UTF-8 parameter enable.
2.allow display calling party name
but still could not seen calling name, can anyone have solution to fix this issue? i also checked some web site and found that they were problem on microsoft side did not support for this feature yet. please help to clarify
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...