An issue occurs when an off-net call, from either a mobile VPN user or a user on another PBX connected to the UCM here in the UK - calls a device on another UCM (connected via ICT) that is call forward always to an offnet number. I have looked at the CSS & Partitions and they seem to be correct and DNA shows that the call should route but the call fails to NU tone. The call is successful if the originating device is a CCM userâ¦..Block off=-net to Off net is FALSE on both UCM. One is 5.1 - the other 6.1...any ideas?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...