Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

OFF-Ramp Fax and Dial-Peers

hi,

can someone help me with the following problem:

I configured OFF-Ramp fax. I can send a fax as e-mail from Outlook client to the gateway and it deliver right as fax to the receiver via PSTN.

I use FAX=0030123456@faxgateway.domain.local as mail address.

I use a mmoip-dial-peer with incoming called-number 0. and a pots dial-peer for outgoing with destination-pattern 0.

This works fine.

Now I created a mmoip-dial peer with incoming called-number 49. and a pots dial-peer for outgoing with destination-pattern 49. for user how want to use

FAX=+4930123456@faxgateway.domain.local as mail address. Add Prefix 0 to present right number to provider.

But this didnt work. The debug dial-peer command show right the incoming mmoip peer with 49. , but then for outgoing no match.

Here are the peer configuration that didnt work.

dial-peer voice 7000 mmoip

description Offramp Fax incoming from Clients

service offramp-app

information-type fax

incoming called-number 49.

!

dial-peer voice 7001 pots

description Offramp Fax to PSTN

preference 7

destination-pattern 49.

information-type fax

prefix 0

port 0/0/0

!

dial-peer voice 7002 pots

description Offramp Fax to PSTN

preference 8

destination-pattern 49.

prefix 0

information-type fax

port 0/0/1

!

and this is the configuration works:

dial-peer voice 1000 mmoip

description Offramp Fax incoming from Clients

service offramp-app

information-type fax

incoming called-number 0.

!

dial-peer voice 1001 pots

description Offramp Fax to PSTN

preference 3

destination-pattern 0.

information-type fax

port 0/0/0

!

dial-peer voice 1002 pots

description Offramp Fax to PSTN

preference 4

destination-pattern 0.

information-type fax

port 0/0/1

!

1121
Views
0
Helpful
0
Replies
CreatePlease to create content