I have got a problem on CCM4.2 where the Offnet to Offnet transfer wont't work. I have checked the service parameter to make sure it is allowed. External party A calls in. I press transfer then dial another external party B. I can announce the call to external party B. As soon as i press transfer to connect the 2 partys. Both calls get disconnected. Is it possible that there is something on the gateway that has to be done to allow this. It is happening on 2 differtent sites. 1 is PRI and the other BRI.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...