06-15-2007 12:39 PM - edited 03-14-2019 10:06 PM
Is it possible to setup a one button CfWD all? I would really like to offer the option of setting up one button to forward all calls to say... a users Cell phone. -Thanks
Solved! Go to Solution.
06-18-2007 07:32 AM
This is available in CM 6.0 where you can utilize a new feature "Programmable Line Keys" and configure the Line Buttons with softkey features, such as "CallForwardAll, newcall, Endcalls, callback, hold, conference etc."
This cannot be done in CMs prior to 6.0.
HTH, please rate all posts!
Chris
06-15-2007 01:45 PM
You should be able to do a forward all using the softkey CFwdALL. Will that not work?
Larry
06-18-2007 05:06 AM
Well, I was looking for a way to assign the CFwdALL and a phone number to single key.
06-18-2007 07:32 AM
This is available in CM 6.0 where you can utilize a new feature "Programmable Line Keys" and configure the Line Buttons with softkey features, such as "CallForwardAll, newcall, Endcalls, callback, hold, conference etc."
This cannot be done in CMs prior to 6.0.
HTH, please rate all posts!
Chris
06-22-2007 05:28 AM
I've set this up on a 4.1(3) box using the IPPhone callForwarder tool from www.myvoipsource.org and a service URL button. I used version 1 if I remember correctly because it allowed the forward information to be coded into the URL. So single button on/off call forwarding, and it was also on a non-primary line.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide