I'am having a strange problem with my Ip telephony, when a caller call to my call center. the call center agent can hear the caller but the caller doesnt hear anything, after few minutes the agent get linked to another agent in our network (in a diffrent subnet-another call center) they both can hear each other and they both can hear the original caller waiting on the line.
my setup is a blade voice with PRI lines in a 6513 catalyst switch.
the whole telephony infrastrucure is handled and managed by an external phone company, i asked them to check from their side but they think its network related.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...