Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

one way audio in the middle of the call

first Thank you all for this great forum , i have learned a lot from you guys.

i have an issue between one of my sites and the head office,

ip phone to ip phone (all SIP) calls is changing to one way in the middle .

Scenario:

Phone A at head office having a call with Phone B at the branch.

 randomly after ( 7 seconds to 2 minutes ) phone A stops hearing phone B but phone B keep hearing phone A

i have attached the stats of both phones during one of the calls,

i see that the phone at head office is getting some (Rcvr Lost Packets) while the phone B has none.

could this be an issue in the link between the two sites ? because i have another link to another site and no issue happening there.

Thanks in advance

1 REPLY
New Member

Hi Soloo,As you figured out,

Hi Soloo,

As you figured out, I believe it is all about routing issue and dropped packets.

just to make sure, try to capture the voice traffic with WireShark from the machine attached to the phone A at Head office. and you will find no voice packets during the one way audio interval.

please make sure that you enabled <<Span to PC Port>> option at the CUCM IP Phone configuration.

 

Regards,

Mohamed Helmy

Regards, Mohamed Helmy
102
Views
0
Helpful
1
Replies
CreatePlease login to create content