Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

One-way audio stream

Good day!

Several days ago i've finally implemented new Telephony System based on CUCM. But some times we have a strange issue: When operator try to transfer call to remote destination (remote office, phone in this office is registered to CUCM) from PSTN, PSTN caller and remote phone can't hear each other, after they were connected by operator. Or even when remote phone tries to make outbound call to PSTN

Here is simple topology

Where can be the problem? Can you help please?

Remote offices and Central office are connected betwenn by IPSEC tunnel on ASA 5505 or D-LINK DFL-260E. I've disabled traffis inspection of sip, skinny and h323 on all edge devices.

  • IP Telephony
New Member

One-way audio stream

Problem appeared also in central office - between local gateway and CUCM. All phones are in different subnets and connected throug one L3 switch.

This widget could not be displayed.