Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

one-way listening vic-2fxs(2801) -ccm6.0 - other device

Good day!

Dont listen remote subscriber when call him to phone, connected to fxs

Fxs registered on ccm6,0 use sccp, status - registered.

show any listings^

zzzzzz#sh sccp

SCCP Admin State: UP

Gateway Local Interface: FastEthernet0/1

IPv4 Address: 192.168.11.34

Port Number: 2000

IP Precedence: 1

User Masked Codec list: None

Call Manager: 192.168.110.100, Port Number: 2000

Priority: N/A, Version: 6.0, Identifier: 1

Trustpoint: N/A

Alg_Phone Oper State: ACTIVE - Cause Code: NONE

Active Call Manager: 192.168.110.100, Port Number: 2000

TCP Link Status: CONNECTED, Device Name: AN215532AEA3000

Reported Max Streams: 1, Reported Max OOS Streams: 0

Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30

Supported Codec: g711ulaw, Maximum Packetization Period: 20

Supported Codec: g711alaw, Maximum Packetization Period: 20

Supported Codec: g729r8, Maximum Packetization Period: 220

Supported Codec: g729ar8, Maximum Packetization Period: 220

Supported Codec: g729br8, Maximum Packetization Period: 220

Supported Codec: g729r8, Maximum Packetization Period: 220

Supported Codec: ilbc, Maximum Packetization Period: 120

Alg_Phone Oper State: ACTIVE - Cause Code: NONE

Active Call Manager: 192.168.110.100, Port Number: 2000

TCP Link Status: CONNECTED, Device Name: AN215532AEA3001

Reported Max Streams: 1, Reported Max OOS Streams: 0

Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30

Supported Codec: g711ulaw, Maximum Packetization Period: 20

Supported Codec: g711alaw, Maximum Packetization Period: 20

Supported Codec: g729r8, Maximum Packetization Period: 220

Supported Codec: g729ar8, Maximum Packetization Period: 220

Supported Codec: g729br8, Maximum Packetization Period: 220

Supported Codec: g729r8, Maximum Packetization Period: 220

Supported Codec: ilbc, Maximum Packetization Period: 120

what is your meaning about this problem??

2 REPLIES
Hall of Fame Super Gold

Re: one-way listening vic-2fxs(2801) -ccm6.0 - other device

What's in there between GW and CM ?

Community Member

Re: one-way listening vic-2fxs(2801) -ccm6.0 - other device

any routers in mpls network..

trouble was shoot by use this command:

sccp codec g711ulaw mask

148
Views
0
Helpful
2
Replies
CreatePlease to create content