Im trying configure public space IP Phones for one way video. The Public IP Phone must not display the Corporate User on the phone display, however the Corporate user must be able to view the caller at the Public Phone.
I have tried Hiding Video, disabling video, but these seem to have the reverse effect, aswell as the local user can press camer button etc to re-enable features.
All corporate users require point to point video calling internally, so globally disabling Video is out of the question.
The only way I can think of is to break the video stream going to the public IP Phone with a VACL of some sort.
If you have configured one way video in CUCM and in particular for the 8941 Series IP Phone, please let me know.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...