Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

one way voice communication problem

Hi,

We are trying to configure a sip gateway with the below configuration. The router is installed with 4 fxo ports which i am connecting to a pstn line with the config as below.

dial-peer voice 10 pots

destination pattern 9t

port 0/0/0

forward digits all

When i dial any outside number through sip soft phone ,I am facing one way voice issue.

There is no sip servers as such in the network.

3 REPLIES
New Member

Re: one way voice communication problem

Take a look at this document to troubleshoot one-way voice issue...

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a008009484b.shtml

hieu

Super Bronze

Re: one way voice communication problem

Hi

Check you have 'IP routing' enabled globally.

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Re: one way voice communication problem

Hi,

When you say there is not sip servers in the network, then how do you intiate the call?

Which sip softphone are you using?

At you sip phone, what do you configure for sip proxy?

I had done test before, basically you need a dial-peer voip using sipv2 point to your sip softphone

Thanks

SS

187
Views
0
Helpful
3
Replies