We are currently deploying a CCM 4.2 system. Each of our offices has an FXS port for paging. We placed a standard phone on the line and used it to call a local extention and it works fine. When we try to call to our corporate office, they can hear me but I can't hear them. This FXS card is in a 2801 that is being used as our firewall and has a VPN tunnel back to our corporate office. The FXS card is registering with an IP address of the tunnel. Could this be causing our issue?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...