I'm having the following setup for a customer: PSTN - SIP Provider - Cube - CUCM7.1.3
My customer wants to have incoming faxes converted to an e-mail message. I've done this several times before with the onramp TCL script without any problem but never with a SIP trunk (allways with PRI or BRI). With my sip trunking i cannot get it to work.
You wont be able to do this with SIP. To convert the fax to TIFF images, you need to have DSP. If you really need to do it, you can have back to back E1/T1 card on the CUBE and let the fax call pass through sip to PRI to PRI and onramp fax.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...