I am going to change my MCS server for a UCS server on vmware in a new network . Currently I have the TFTP and DHP pool service in all local routers (UCM is not giving that services). However my client wants the phones don´t move to the new network. So my new UCS server will be in a different network. Can I specify the new call manager in a different network than telephone network? Can I specify a second call manager as TFTP on a local router?
ip dhcp excluded-address x.x.x.1 x.x.x.5 ip dhcp pool local phones network x.x.x..0 255.255.255.0 default-router x.x.x.1 option 150 ip y.y.y.y lease infinite
I don´t have ip helper-address in my remote gateways. However I just moved the ip option 150 to my new UCS server and it worked properly. Now the DHCP service is in the x network and the TFTP is in the another network (y network). The phones of the old MCS server were registered properly in the new server.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...