Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Ordering CallManager 5.1

Hi Everyone,

I believe that it is possible to order MCS servers with CCM 5.1 pre-loaded.

Apparently you can use the Top level Part Number "CALLMANAGER-5.1" to do this ?

Is this the case or does something else need to be "ordered" to have the MCS arrive with CCM pre-loaded ?

Many thanks,

Matt

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Ordering CallManager 5.1

Hi Matt,

The part # should show this (CMA2) for the MCS to come pre-loaded with CCM 5.1. Have a look;

MCS7835I2-K9-CMB1 (preloaded with Cisco Unified Communications Manager 6.0)

MCS7835I2-K9-CMA2 (preloaded with Cisco Unified Communications Manager 5.1)

From this doc;

http://www.cisco.com/en/US/products/hw/voiceapp/ps378/products_data_sheet0900aecd805718a8.html

MCS7825H3-K9-CMB1 (preloaded with Cisco Unified Communications Manager 6.0)

MCS7825H3-K9-CMA2 (preloaded with Cisco Unified Communications Manager 5.1)

From this doc;

http://www.cisco.com/en/US/products/hw/voiceapp/ps378/products_data_sheet0900aecd805efb14.html

The top level part # should probably have this as well :)

Hope this helps!

Rob

2 REPLIES
Hall of Fame Super Red

Re: Ordering CallManager 5.1

Hi Matt,

The part # should show this (CMA2) for the MCS to come pre-loaded with CCM 5.1. Have a look;

MCS7835I2-K9-CMB1 (preloaded with Cisco Unified Communications Manager 6.0)

MCS7835I2-K9-CMA2 (preloaded with Cisco Unified Communications Manager 5.1)

From this doc;

http://www.cisco.com/en/US/products/hw/voiceapp/ps378/products_data_sheet0900aecd805718a8.html

MCS7825H3-K9-CMB1 (preloaded with Cisco Unified Communications Manager 6.0)

MCS7825H3-K9-CMA2 (preloaded with Cisco Unified Communications Manager 5.1)

From this doc;

http://www.cisco.com/en/US/products/hw/voiceapp/ps378/products_data_sheet0900aecd805efb14.html

The top level part # should probably have this as well :)

Hope this helps!

Rob

New Member

Re: Ordering CallManager 5.1

Hi Rob,

it does - many thanks.

I have a Bill Of Materials given to me from my Pre-Sales Consultant and it includes:

MCS7835H2-K9-CMA2

However, another question - I presume 'pre-loaded' means simply that the software is stored on the MCS and the full Install process still has to be carried out ?

Wouldn't it be nice if all we had to do was enter usernames, passwords etc :-)

Best wishes,

Matt

107
Views
0
Helpful
2
Replies