I have configured some translation rules that are supposed to translate the outbound caller ID of my FAX as one particular number and all other phones/extensions as another. The rules look like this:
voice translation-rule 110
rule 1 /280/ /4085552222/ desired caller id of FAX 1
rule 2 /281/ /4085553333/ desired caller id of FAX 2
rule 3 /.+/ /4085551111/ all others use main # for caller id
voice translation-profile EXT2PSTN
translate calling 110
When my phones call out they show the correct number in the caller ID. However when the FAXes call out (FAXes are ext 280 and 281) they also show the main number of 4085551111. The rule looks OK so it must be where I am inserting the translation commands. Currenty I use "translation-profile outgoing EXT2PSTN" on the DNs that match outbound PSTN calls.
IntroductionCUCM Routing RulesDial String implementation PolicyCUCM Routing LogicSIP URI Call Routing Analysis+++ Case Study: 1 ++++++ Case Study: 2 +++Conclusion
Over the last few months, I have had the privilege of working on SI...
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...