Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Outbound H.323 calls failing with Cause Value=47

Scenario:

User lifts handset dial number (local, LD, Int, toll free, doesn't matter) and hears a fast busy. User hangs up, lifts handset dials same number and call processes normally.

Call Manager version 4.2(3)sr4b

ISR Gateway Cisco 3845 12.4(15)T3

I belive this has something to do with my dspfarm configuration, see below.

pxcrahrt1#sh run | sec dspfarm

dspfarm

dsp services dspfarm

dspfarm profile 1 transcode

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

maximum sessions 13

associate application SCCP

dspfarm profile 2 conference

description NM-DSPFARM Conference Bridge

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 2

associate application SCCP

dspfarm profile 3 mtp

description MTP resources for SIP trunks

codec g711ulaw

maximum sessions hardware 40

associate application SCCP

4 REPLIES

Re: Outbound H.323 calls failing with Cause Value=47

47 = Resources unavailable, unspecified

The requested channel or service is unavailable for an unknown reason. This might be a temporary problem.

What type of connection are you using? T1 CAS, PRI, E1?

New Member

Re: Outbound H.323 calls failing with Cause Value=47

This issue was requested by reallocating the available DSP resources.

Thanks

New Member

Re: Outbound H.323 calls failing with Cause Value=47

This issue was CORRECTED by reallocating the available DSP resources.

New Member

Re: Outbound H.323 calls failing with Cause Value=47

Im seeing the same issue over 4 BRIs. What was wrong with your DSP config and what did you change to fix.

494
Views
5
Helpful
4
Replies