Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Outdial MPE

Hi I have a cisco Meeting Place Express version Version: 2.0.3.35, and I Configured the outdial. I enable the H.323 and I set the following parameter:

E.164 address: 9000

H.323 ID : MPE

H.323 Number Type : Unknown

Local H.323 port: 1720

Use gatekeeper: No

H.323 gateway 1 : IP Address of the CCM.

But I cannot call to extension in the Cisco Phone registered in the Cisco Call Manager from the Meeting Place Web Page.

I open a terminal in the SSH and executes the following tests:

[mpxadmin@mpe mpxadmin]$ activity

VUI Configuration: 250 Sessions, 250 Confs

*** VUI INTERNAL STATUS UTILITY ***

DebugMenu:

1) Quick Status of all Ports 4) Make Test Call

2) Verbose Status of Port Range 5) Show All Confs

3) Display complete Port Information 0) Quit

Enter the Command (0 -- 100) []: 4

You entered 4.

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Failed to create VUI test call thread, rc = 1

Enter destination for your call: 3003

The Telephone Number is 3003. Len is 4

Do you want specific ports? (t -- F): F

You entered F.

Placing Call .....

And the call is not established...What can I do?

2 REPLIES
New Member

Re: Outdial MPE

Do you have MPE setup as an H323 GW in CM with the proper CSS and such on it?

Having the H323 configured on MPE and CM should be all you need.

Hope this helps,

Travis

New Member

Re: Outdial MPE

Yes, I have the MPE as H.323 Gateway in the CCM. And the call from the Cisco Phone to MPE are succesfull.

166
Views
0
Helpful
2
Replies