Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Outgoing call for faxes connected on FXS ports

I have an UC500 and incoming calls works to the fax machine but outgoing doesn not work. I thought it should go on the outgoing dial-peer created. Is this wrongly configured?

3 REPLIES

Re: Outgoing call for faxes connected on FXS ports

try adding 'no vad' to your two voip dial peers.

Other than that, it should be fine.

hth,

nick

New Member

Re: Outgoing call for faxes connected on FXS ports

I added it to the voip dial peers. Incoming works just fine but not outgoing. I dont even get an dialtone. Could it be some codec problem?

New Member

Re: Outgoing call for faxes connected on FXS ports

I added it to the voip dial peers. Incoming works just fine but not outgoing. I dont even get an dialtone. Could it be some codec problem.

114
Views
0
Helpful
3
Replies
CreatePlease to create content