Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Outgoing calls are not working through SIP trunk

DebugHi

I have CUCM8.6 and Voice gateway that are connected through SIP Trunk to Teleco or MOC

it is giving me bust tone when i am tring call outside through sip trunk

Note : E1 module and FXO module  are not used or not available , the call is going from my voice router to Teleco Router to go outside

DID ext : 22270800 to 899

why i cant call outside ???? how to solve it ???

below the configuration and debug

the configuration is

card type e1 0 3

enable secret 4 gMj8cDXfU6CzFI9r1WoD5G6GTI5KwVY2O2lU2DSTP4c

!

no aaa new-model

network-clock-participate wic 3

!

no ipv6 cef

ip source-route

ip cef

!

!

!

!

!

multilink bundle-name authenticated

!

!

!

!

isdn switch-type primary-net5

!

crypto pki token default removal timeout 0

!

!

voice-card 0

!

!

!

voice service voip

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none

sip

  bind control source-interface GigabitEthernet0/0

  bind media source-interface GigabitEthernet0/0

!

!

!

!

!

license udi pid CISCO2901/K9 sn FCZ1624711H

hw-module pvdm 0/0

!

!

!

!

redundancy

!

!

controller E1 0/3/0

pri-group timeslots 1-31

!

!

!

!        

!

interface Embedded-Service-Engine0/0

no ip address

shutdown

!

interface GigabitEthernet0/0

description ## Connected to Fasttlco P2P ##

ip address 10.101.6.18 255.255.255.252

duplex auto

speed auto

!

interface GigabitEthernet0/1

description ## Internal Network ##

ip address 10.10.1.5 255.255.255.0

duplex auto

speed auto

!

interface Serial0/3/0:15

no ip address

encapsulation hdlc

isdn switch-type primary-net5

isdn incoming-voice voice

no cdp enable

!        

router rip

version 2

network 10.0.0.0

no auto-summary

!

ip forward-protocol nd

!

no ip http server

no ip http secure-server

!

!

!

!

!

control-plane

!

!

voice-port 0/0/0

!

voice-port 0/0/1

!

voice-port 0/3/0:15

!

voice-port 0/1/0

!

voice-port 0/1/1

!

voice-port 0/1/2

!

voice-port 0/1/3

!

voice-port 0/2/0

!

voice-port 0/2/1

!

voice-port 0/2/2

!

voice-port 0/2/3

!

!

!

mgcp profile default

!

!

dial-peer voice 10 voip

destination-pattern 8..

session protocol sipv2

session target ipv4:10.200.200.50

incoming called-number .

dtmf-relay rtp-nte

codec g711ulaw

!

dial-peer voice 11 pots

destination-pattern 9.T

progress_ind setup enable 3

progress_ind alert enable 8

progress_ind progress enable 8

progress_ind connect enable 8

direct-inward-dial

port 0/3/0:15

!

!

!

!

gatekeeper

shutdown

!

Debug is

Sep  1 20:20:04.630: //41/8017470F1100/CCAPI/cc_api_get_transfer_info:

   Transfer Number Is Null

Sep  1 20:20:04.630: //41/8017470F1100/CCAPI/cc_api_call_disconnect_done:

   Disposition=0, Interface=0x3101F7A4, Tag=0x0, Call Id=41,

   Call Entry(Disconnect Cause=21, Voice Class Cause Code=0, Retry Count=0)

Sep  1 20:20:04.630: //41/8017470F1100/CCAPI/cc_api_call_disconnect_done:

   Call Disconnect Event Sent

Sep  1 20:20:04.630: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:

Sep  1 20:20:04.630: :cc_free_feature_vsa freeing 2B3F72C8

Sep  1 20:20:04.630: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:

Sep  1 20:20:04.630:  vsacount in free is 0

Sep  1 20:20:21.794: //-1/001669191200/CCAPI/cc_api_display_ie_subfields:

   cc_api_call_setup_ind_common:

   cisco-username=22270840

   ----- ccCallInfo IE subfields -----

   cisco-ani=22270840

   cisco-anitype=0

   cisco-aniplan=0

   cisco-anipi=0

   cisco-anisi=1

   dest=924950500

   cisco-desttype=0

   cisco-destplan=0

   cisco-rdie=FFFFFFFF

   cisco-rdn=

   cisco-rdntype=-1

   cisco-rdnplan=-1

   cisco-rdnpi=-1

   cisco-rdnsi=-1

   cisco-redirectreason=-1   fwd_final_type =0

   final_redirectNumber =

   hunt_group_timeout =0

Sep  1 20:20:21.794: //-1/001669191200/CCAPI/cc_api_call_setup_ind_common:

   Interface=0x3101F7A4, Call Info(

   Calling Number=22270840,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),

   Called Number=924950500(TON=Unknown, NPI=Unknown),

   Calling Translated=FALSE, Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE,

   Incoming Dial-peer=10, Progress Indication=NULL(0), Calling IE Present=TRUE,

   Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=42

Sep  1 20:20:21.794: //-1/001669191200/CCAPI/ccCheckClipClir:

   In: Calling Number=22270840(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)

Sep  1 20:20:21.794: //-1/001669191200/CCAPI/ccCheckClipClir:

   Out: Calling Number=22270840(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)

Sep  1 20:20:21.794: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

Sep  1 20:20:21.794: :cc_get_feature_vsa malloc success

Sep  1 20:20:21.794: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

Sep  1 20:20:21.794:  cc_get_feature_vsa count is 1

Sep  1 20:20:21.794: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:

Sep  1 20:20:21.794: :FEATURE_VSA attributes are: feature_name:0,feature_time:725578448,feature_id:42

Sep  1 20:20:21.794: //42/001669191200/CCAPI/cc_api_call_setup_ind_common:

   Set Up Event Sent;

   Call Info(Calling Number=22270840(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),

   Called Number=924950500(TON=Unknown, NPI=Unknown))

Sep  1 20:20:21.794: //42/001669191200/CCAPI/cc_process_call_setup_ind:

   Event=0x2B7C9F18

Sep  1 20:20:21.794: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:

   Try with the demoted called number 924950500

Sep  1 20:20:21.794: //42/001669191200/CCAPI/ccCallSetContext:

   Context=0x2ADBAE4C

Sep  1 20:20:21.794: //42/001669191200/CCAPI/cc_process_call_setup_ind:

   >>>>CCAPI handed cid 42 with tag 10 to app "_ManagedAppProcess_TOLLFRAUD_APP"

Sep  1 20:20:21.794: //42/001669191200/CCAPI/ccCallDisconnect:

   Cause Value=21, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)

Sep  1 20:20:21.794: //42/001669191200/CCAPI/ccCallDisconnect:

   Cause Value=21, Call Entry(Responsed=TRUE, Cause Value=21)

Sep  1 20:20:21.794: //42/001669191200/CCAPI/cc_api_get_transfer_info:

   Transfer Number Is Null

Sep  1 20:20:21.794: //42/001669191200/CCAPI/cc_api_call_disconnect_done:

   Disposition=0, Interface=0x3101F7A4, Tag=0x0, Call Id=42,

   Call Entry(Disconnect Cause=21, Voice Class Cause Code=0, Retry Count=0)

Sep  1 20:20:21.794: //42/001669191200/CCAPI/cc_api_call_disconnect_done:

   Call Disconnect Event Sent

Sep  1 20:20:21.794: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:

Sep  1 20:20:21.794: :cc_free_feature_vsa freeing 2B3F72C8

Sep  1 20:20:21.794: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:

thanks and regards

1 REPLY
New Member

Outgoing calls are not working through SIP trunk

There was another post from alex today responding to the same issue. Here is the extract from his post:

This disconnect is because of the tall fraud prevention.

"You may try adding the following:

voice service voip
 ip address trusted list
  ipv4 0.0.0.0 0.0.0.0

But it is good to fill with specific servers.

Please take a look at the following link about tall fraud prevention:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080b3e123.shtml

Link to the Post: https://supportforums.cisco.com/message/3723154#3723154

755
Views
0
Helpful
1
Replies