08-07-2014 04:16 AM - edited 03-16-2019 11:40 PM
Hi All,
please advise on this.
I have a router with 4 BRI and the client require to see their own number when they dialing out instead of main number.
from debug isdnq931 i see the router already send the correct number 97775882 but on the receipt it shows 97775880 instead.
Aug 7 10:30:46.422: ISDN BR0/0/0 Q931: Sending SETUP callref = 0x000C callID = 0x802B switch = vn3 interface = User
Aug 7 10:30:46.422: ISDN BR0/0/0 Q931: TX -> SETUP pd = 8 callref = 0x0C
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x81
Preferred, B1
Shift to Codeset 6
Codeset 6 IE 0x24 i = 0x80
Progress Ind i = 0x8183 - Origination address is non-ISDN
Display i = ''
Calling Party Number i = 0x2180, '037797775882'
Plan:ISDN, Type:National
Called Party Number i = 0xA1, '0033623864219'
Plan:ISDN, Type:National
High Layer Compat i = 0x9181
Sending Complete
Aug 7 10:30:46.794: ISDN BR0/0/0 Q931: RX <- CALL_PROC pd = 8 callref = 0x8C
Channel ID i = 0x89
Exclusive, B1
Aug 7 10:30:55.770: ISDN BR0/0/0 Q931: RX <- ALERTING pd = 8 callref = 0x8C
Aug 7 10:31:10.198: ISDN BR0/0/0 Q931: TX -> DISCONNECT pd = 8 callref = 0x0C
Cause i = 0x8790 - Normal call clearing
Thanks & Regards
Solved! Go to Solution.
08-07-2014 04:45 AM
Hi
So 97775880 which is the central number of your circuit only appear.Based on your debugs , your call match correct translation-rule , and hit correct dial-peer and if you see when you dial from 5886. So you have to check with your teleco that caller id should be enable from his side and you do not have any issues.
Destination=, Calling IE Present=TRUE, Mode=0, Outgoing Dial-peer=6, Params=0x21EBC32C, Progress Indication=ORIGINATING SIDE IS NON ISDN(3) Aug 7 11:07:59.202: //184/E82287BA81BE/CCAPI/ccCheckClipClir: In: Calling Number=037797775886
And we can see below that your call go out with the correct caller id.
Bearer Capability i = 0x8090A3 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0x81 Preferred, B1 Shift to Codeset 6 Codeset 6 IE 0x24 i = 0x80 Progress Ind i = 0x8183 - Origination address is non-ISDN Display i = 'Paolo Gatti' Calling Party Number i = 0x2180, '037797775886' Plan:ISDN, Type:National Called Party Number i = 0xA1, '0041791981218' Plan:ISDN, Type:National High Layer Compat i = 0x9181 Sending Complete
Thanks
please rate all useful information
08-07-2014 04:45 AM
Hi, you should talk to your Telco on this issue as you are sending the correct number out
08-07-2014 04:45 AM
Hi
So 97775880 which is the central number of your circuit only appear.Based on your debugs , your call match correct translation-rule , and hit correct dial-peer and if you see when you dial from 5886. So you have to check with your teleco that caller id should be enable from his side and you do not have any issues.
Destination=, Calling IE Present=TRUE, Mode=0, Outgoing Dial-peer=6, Params=0x21EBC32C, Progress Indication=ORIGINATING SIDE IS NON ISDN(3) Aug 7 11:07:59.202: //184/E82287BA81BE/CCAPI/ccCheckClipClir: In: Calling Number=037797775886
And we can see below that your call go out with the correct caller id.
Bearer Capability i = 0x8090A3 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0x81 Preferred, B1 Shift to Codeset 6 Codeset 6 IE 0x24 i = 0x80 Progress Ind i = 0x8183 - Origination address is non-ISDN Display i = 'Paolo Gatti' Calling Party Number i = 0x2180, '037797775886' Plan:ISDN, Type:National Called Party Number i = 0xA1, '0041791981218' Plan:ISDN, Type:National High Layer Compat i = 0x9181 Sending Complete
Thanks
please rate all useful information
08-07-2014 04:45 AM
Hi, you should talk to your Telco on this issue as you are sending the correct number out
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide