I have a 2821 with 8 fxo ports and 8 phones. I want each phone have his own fxo for outgoing/incoming calls.
For incoming i used the PLAR command under voice-port, that's ok.
But for outgoing it uses one of the FXO,I tried the trunk command but in this case all calls are sent to FXO even internal one. One solution is to apply the trunk command on a secondary lines dedicated to out calls but this is not alright for the customer. Only one line by phone.
How can I make each primary line of the phone using his own FXO for outgoing ?
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4