I'm trying to test an off-net breakin call and when the SIP INVITE arrives to CUBE, it response with a 180 Ringing and I have seen that P-Asserted Identity is completed with the extension not with E.164 number. How could I modified this?
If you send in your debug ccsip message trace and the e164 number you want to translate to, I may be able to configure a sip profile for you. Sip profiles are a bit tricky to understand, so I may be able to help
Please rate all useful posts
"The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
SIP protocol uses a number of headers for communications. P-asserted identity is one of them. Sometimes it is necessary to modify these headers as your case suggests. The process of modifying them uses most time sip profiles. To understand better how sip profiles work have a look here..
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...