Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Passcode on Cisco IP Phone

Hello All

I would need an advise on the following;

I have a remote IP Phone and I am required to create a passcode for it to be able to make phone calls. The IP Phone is registering to a Router offshore setup as a Call Manager Express:

Is there any way I can configure the Call Manager Express Router to be able to allow only one phone registering to it to be setup with this passcode.

Any advice will be most welcome.

Many Thanks in advace.

Everyone's tags (5)
7 REPLIES
VIP Super Bronze

Passcode on Cisco IP Phone

What version of CCME are you running..You can use FAC to achieve this

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

Passcode on Cisco IP Phone

Thanks for the reply

I am using the follwoing:

SCCP42.9-0-3S

VIP Super Bronze

Passcode on Cisco IP Phone

Can you type show telephony-service on your gateway and send the output here. It will show which CCME version you are running

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

Passcode on Cisco IP Phone

Router#     show telephony-service

CONFIG (Version=8.6)

=====================

Version 8.6

Max phoneload sccp version 17

Max dspfarm sccp version 18

Cisco Unified Communications Manager Express

For on-line documentation please see:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html

protocol mode default

ip source-address xxx.xxx.xxx.xxx port 2000

ip qos dscp:

ef (the MS 6 bits, 46, in ToS, 0xB8) for media

cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal

af41 (the MS 6 bits, 34, in ToS, 0x88) for video

default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup

no auto-reg-ephone

load 7906 SCCP11.8-2-2SR1S

load 7911 SCCP11.8-2-2SR1S

load 7942 SCCP42.9-0-3S

max-ephones 35

max-dn 10

max-conferences 4 gain -6

dspfarm units 0

dspfarm transcode sessions 0

conference software

privacy

no privacy-on-hold

hunt-group report delay 1 hours

hunt-group logout DND

max-redirect 10

cnf-file location: system:

cnf-file option: PER-PHONE-TYPE

network-locale[0] GB   (This is the default network locale for this box)

network-locale[1] US

network-locale[2] US

network-locale[3] US

network-locale[4] US

user-locale[0] US    (This is the default user locale for this box)

user-locale[1] US

user-locale[2] US

user-locale[3] US

user-locale[4] US

srst mode auto-provision is OFF

srst ephone template is 0

srst dn template is 0

srst dn line-mode single

time-format 24

date-format dd-mm-yy

timezone 0 Greenwich Standard Time

call-forward pattern .T

no transfer-pattern is configured, transfer is restricted to local SCCP phones only.

keepalive 30 auxiliary 30

timeout interdigit 5

timeout busy 10

timeout ringing 180

timeout transfer-recall 0

timeout ringin-callerid 8

timeout night-service-bell 12

caller-id name-only: enable

edit DN through Web:  enabled.

edit TIME through web:  enabled.

background save interval 10 minutes

Log (table parameters):

     max-size: 150

     retain-timer: 15

create cnf-files version-stamp 7960 Apr 13 2012 03:44:26

transfer-system full-consult

transfer-digit-collect new-call

local directory service: enabled.

Extension-assigner tag-type ephone-tag.

VIP Super Bronze

Passcode on Cisco IP Phone

Right so you are running CCME 8.6

Below is the link to use to configure FAC..

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmefac.html

This is a link on this forum for similar configuration..

https://supportforums.cisco.com/message/3383747#3383747

Pls rate all helpfull posts

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

Passcode on Cisco IP Phone

I put in the followng configuration on the CME router but did not obtain the results: any advice as to why this could be the case?

!

voice lpcor enable

voice lpcor custom

group 11 IPPhone

!

voice lpcor policy IPPhone

service fac

accept IPPhone fac

!

application

package auth

  param passwd-prompt flash:en_bacd_welcome.au

  param passwd 1463

!

!

ephone  8

lpcor type local

lpcor outgoing IPPhone

device-security-mode none

description BP Jordan

mac-address D4D7.4841.94C7

codec g729r8

type 7942

button  1:8

!

I will be grateful to have any advise on this.

Regards

Kaushik

VIP Super Bronze

Passcode on Cisco IP Phone

Kaushik,

I provided a link with the full config required. I looked at your configuration and you dont have

1. AA config..

aaa new-model

!

!

aaa authentication login default local

aaa authentication login h323 local

aaa authorization exec h323 local

aaa authorization network h323 local

aaa session-id common

gw-accounting aaa

2.your lpcor configuration is wrong/incomplete

1. you need to configure lpcor for phone and PSTN destination you want to force authorization for

ex:

voice lpcor enable

voice lpcor custom

group 10 IPPhone

group 11 PSTN

!

voice lpcor policy IPPhone

service fac

accept IPPhone fac

accept PSTNT fac

!

voice lpcor policy PSTN

service fac

accept IPPhone fac

accept PSTNT fac

You configured the lpcor wrongly "lpcor outgoing IPPhone" it should be "lpcor incoming IPPhone"

3. You did not configure Paramaters correctly

application

package auth

  param passwd-prompt flash:en_bacd_welcome.au

  param passwd 5555

  param term-digit #

  param user-prompt flash:en_bacd_enter_dest.au

  param abort-digit *

  param max-digits 32

* PIN Configuration** (for the end user you want restricted)

username xxxxx password 0 yyyyy  (eg.username 5555 password 0 12345)

4. Apply the lpcor to your dial-peer for outgoing calls

dial-peer voice xxx pots

lpcor outgoing PSTN

5. apply lpcor policy to the phone

ephone  8

lpcor type local

lpcor incoming IPPhone

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
523
Views
0
Helpful
7
Replies
CreatePlease to create content