Passing 9971 SIP Phone through ASA to get to Call Manager server
While waiting for our SIP service to be ordered, I want to get our 9971 phones talking to Call Manager. I have an internal ASA running 8.2.5 code to pass through from the phones to Call Manager. I am not running NAT or PAT on the ASA. From Call Manager to the phones, all I think I need to do is enable SIP inspecting in MPF. Not having a lot of luck find the ports I need to open on the side of the ASA the phones are on to let them talk to Call Manager.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...