Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Passing Name H323 ATA with Gatekeeper

Hello,

I have an Cisco Gatekeeper/Gateway 2811. Also I have an ATA H323 registered on the Gatekeeper/Gateway.

All that I want is that when I do a call from my Cisco ATA H323 it pass the name that I put on the port of the ATA.

The Cisco ATA H323 doesn't pass it.

The ATA pass port number only.

Any ideas?

Thanks.

Fran.

  • IP Telephony
3 REPLIES
Silver

Re: Passing Name H323 ATA with Gatekeeper

If the Gateway is running H323 then CCM is not relevant and the Caller ID Name must be in the Display IE.

Send the following from the Gatekeeper:

show gatekeeper endpoint

debug ras

Re: Passing Name H323 ATA with Gatekeeper

Gracias por la respuesta Isabel.

Te enviaré show gatekeeper endpoint y debug ras.

En el show gatekeeper endpoint puedo ver H323 id "NOMBRE" pero luego a la hora de hacer una llamada a hacia el call-manager, por ejemplo, no pasa el nombre. Sin embargo con un Softphone H323, por ejemplo, registrado en el GATEKEEPER si pasa el nombre.

No se si es una limitante de los ATA 186 de Cisco.

Sabes algo al respecto?

Gracias,

Francisco.

Re: Passing Name H323 ATA with Gatekeeper

I attach debug ras and show gatekeeper endpoint trace log files, ATA 186 ip address 172.17.5.36 and gw 172.27.0.131.

I hope this help you

140
Views
0
Helpful
3
Replies
This widget could not be displayed.