i've implemented this other way in which they don't dial a pwd but the one that is inside the MeetMe can accept or deny
i created a meetme DN, i created a number in CUCM which was CFA to VM, in unity i matched a call routing rule in which i attemped a transfer to a dummy call handler. the dummy call handler had the transfer rules to call the meet me DN with supervised transfer and asking for the user's name and also announcing and giving the option to accept or deny the entrance.
i know it's not a pwd but it's a way to limit who enters the meetme and also to know the name of the calling party.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...