Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Pause between inter digit

Dear All,

Possible to do a "pause" between inter digit in a route pattern.  we are exploring telco service to save phone cost.  The provider require a "pause" on route pattern.  I am using CCM 4.3.

Is CCM 4.3 having this feature?

Regards,

Lum

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Pause between inter digit

No, you cannot in CUCM.

If you have H323 GWs you could explore using the , there in the DPs for the timeout.

If you use MGCP, there's just no way to do it other than have your users do that.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
6 REPLIES
VIP Super Bronze

Pause between inter digit

Can you please clarify what you mean by a pause on route pattern? What are you trying to achieve

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

Pause between inter digit

Hi Aokanlawon,

We are subscribe the save cost service, every PSTN call require dial 1800871111 continue destination number.  The provider require us to configure the route pattern 1800871111 pause 1 to 2 second then continue destination number.

Regards,

Lum

Cisco Employee

Re: Pause between inter digit

Lum,

If you meant " Pause in speed dials ", then CUCM 9.0 has this new feature, before that ( in earlier versions ) pause in dialing was not allowed. Please refer http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/9_0_1/delta/CUCM_BK_N38FD301_00_new-and-changed-information_chapter_01.html#CUCM_RF_P88E2D85_00

GP.

Pls rate helpful posts by clicking on stars below the post !!

New Member

Pause between inter digit

Hi Gajanan Pande,

Not in speed dial.  we want to do it at pre-fix at called party in route pattern.

Regards,

Lum

Cisco Employee

Pause between inter digit

No, you cannot in CUCM.

If you have H323 GWs you could explore using the , there in the DPs for the timeout.

If you use MGCP, there's just no way to do it other than have your users do that.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Pause between inter digit

Hi Java,

What you mean "other than have your users do that"?  Do you mean phone user can do the "pause"?

Regards,

um

863
Views
10
Helpful
6
Replies
CreatePlease to create content