PBX Interoperability: Nortel Communication Server 1000
Is there any new document for "Cisco Unified CallManager Express Release 3.2 - PBX Interoperability: Nortel Communication Server 1000 Release 4.0 Using H.323 Trunk"
Is anyone of you aware of the following features supportive in new release of CCME 3.2
Limitations CCME 3.2 Called and Calling Name and Number are not displayed on Nortel phone when calling from and to CCME phone Calling Number only displayed on CCME phone when calling from Nortel phone Dialed Number is displayed on Nortel and CCME phones rather than Connected Number when calling from Nortel or CCME Phone H450.2 and H450.3 supplementary services must be disabled and ”allow-connections H323 to H323” must be enabled on CCME to support call transfer and call forward to Nortel, Nortel currently does not support H.450 Supplementary Services Call Transfer and call Forward calls fail if Nortel phone executes call transfer or forward to CCME phone across H323 trunk Full Blind Transfer call fails if CCME phone gets the call from Nortel Phone and executes the full Blind transfer to any phone
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...