no, you don't need to have ip phone and pc on different VLANs
you just need to make sure your phone and pc are using same frame types if they are on same VLAN.... try giving your pc static address and see is there any communication between pc and gateway. if there is, then you need to check your DHCP, cause if you are using different DHCPs, it can cause your address requests looping... if you still don't have connection between pc and gateway, even after you tried setting address manually, see does switchport use dot1q or dot1p...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...