For the PDA, I have a WM5 phone and loaded a piece of software, but I cant seem to find it. Basically, it emulates a 7960 on your phone with wireless. So I can connect my PDA with WiFi to the corp network, load this software, boot up and have it register with CCM as a 7960 phone. CCM sees your PDA as a 7960 and you can do everything you normally can. If I find it, I will post, or search the forums because I have posted in here before.
yes I tried it, on imate but there was problems when making calls between 2 PDAs Echo problems) but I think it can be solved with some troubleshooting. The problem is that the customer has around 30 or 40 PDAs in the site so the amount of money will be big for his budget.
BTW for the avaya phone I found docs on avaya stating that there phones will only work with there call processing server, even the SIP Phone only works with thier server. I remember a conversation in a meeting held by Cisco with a Cisco system engineer he told me that avaya is encapsulating its protocol into SIP packets, that why I think even SIP phones will not work with CM 5
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.