Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Phone ATA187 not working with fax and DTMF

Dear Experts.

I have a problem with cisco ATA187 and SIP ISP, DTMF and Fax not working together.

Scenario:

CUCM9.1 -->ATA187 --> SIP TRUNK -->CUBE-->SIP ISP.

ATA187 -> DP-G711 -> MTP SIP TRUNK uncheck -> Fax ok -> DTMF no ok.

ATA187 -> DP-G729 -> MTP SIP TRUNK check -> Fax no ok -> DTMF ok.

ATA187 -> DP-G711 -> MTP SIP TRUNK check -> Fax no ok -> DTMF no ok -> Call Problem.

I need the dtmf and Fax working together.

Thanks for help!

John.

  • IP Telephony
2 REPLIES
New Member

Phone ATA187 not working with fax and DTMF

Other IP Phone models work well! 7911, 7942.

Phone ATA187 not working with fax and DTMF

First of all, you need to know what Fax Protocol your Service Provider uses, usually is t.38. Second, is well know that MTP causes several issues with Faxing, if the tones are sent on the RTP stream. If you need to have MTP on the SIP Trunk, you need a HW MTP on Cisco IOS Router with codec pass-through configured. Also, you may want to have g711 for fax calls, otherwise they will fail.

HTH

--
Jorge Armijo

Please remember to rate helpful responses and identify helpful or correct answers.

-- Jorge Armijo Please remember to rate helpful responses and identify helpful or correct answers.
177
Views
0
Helpful
2
Replies