I have a trunk sip with a sip provider via cube, the problem is that when the user puts someone on hold, it sounds two MoH, the Music from the call manager and the music from the sip provider, I talked with the SIP Provider and it says that I am sending the ip address 0.0.0.0 on the sip messages and for that reason it sounds the MoH from the sip provider and they cannot change that, how can I blocked the MoH from the sip provider?.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...