Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Phone load for 7931G help

Can someone help me with the correct syntax for the 7931G phone load in CCME

I can't get the phone to select the correct phone load. Right now is selecting term31.default, but I want to specify the correct phone load. I downloaded the 7931 file from Cisco's website but the phone does no take it.

Any ideas

Here is my syntax

Thanks

Armando

File from Cisco CME-7931_8-1-1SR2RN_SCCP.tar extracted to flash

tftp-server flash:apps31.8-1-0-89.sbn

tftp-server flash:cnu31.8-1-0-89.sbn

tftp-server flash:cnu31.8-1-0-89.sbn

tftp-server flash:cvm31sccp.8-1-0-90.sbn

tftp-server flash:dsp31.8-1-0-89.sbn

tftp-server flash:jar31sccp.8-1-0-90.sbn

tftp-server flash:SCCP31.8-1-1SR2S.loads

4 REPLIES
Bronze

Re: Phone load for 7931G help

Paste your telephony-service configuration please

-- -Mark Turpin
New Member

Re: Phone load for 7931G help

The configuration is still being imported by QCT so all I have connected at this point is 3 phones ( 1 7941 and 2 7931G. I'm running CME 4.1 which supports the 7931G and the phones are coming up and registering. However, i would like to select the correct firmware for the phone, term.31 as firmware seems to me like default phone load and not the correct one for 7931G SCCP. With the 7940 and 7960 I know how to do it but with the 7931G the file extension are different and do not know which is the correct one.

Thansk

Armando

New Member

Re: Phone load for 7931G help

try adding the following

conf t

telephony-service

load 7931 SCCP31.8-1-1SR2S

create cnf

then reset the phone.

New Member

Re: Phone load for 7931G help

Jclark,

Thanks! that did it.

Armando

455
Views
0
Helpful
4
Replies