This is a question regarding CCM and the display on the top of the LCD. When you add a telephone, it automatically puts the extension number in the top right corner. How can this be changed to something else, like a name instead?
The equivalent for CCME would be the description command under the phone configuration. Thanks in advance.
I was just messing around with my phone, and it appears that the area you are talking about is controlled by the "external phone number mask" field. However, the only valid characters for that field are numbers, the letter X, and * and #. I did verify this by changing the text in that field, and the display on the top of the LCD changed.
Correct, I've also been in there which makes absolutely no sense at all. However, that is under the directory number settings. That isn't set on a per phone basis. Something so simple like this shouldn't be so hard to find out?
Ken has it right. The one minor detail that he may have missed/didn't mention is that it will be populated by the external phone number mask for the DN appearing on button 1 for that phone (not bashing you, Ken!).
Changing the mask for any other line appearing on the phone will have no effect on the information bar display.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...