If this router is not in the US you will want to enter your CPtone. Otherwise, the 'supervisory disconnect dualtone' will be looking for the wrong frequencies.
By the way - you have a larger problem than phones ringing. Try this - take a phone call from the PSTN, and transfer it out back to the PSTN out the same router. Now disconnect both calls. I'm fairly certain both ports will be stuck in a connected state indefinitely because your FXO disconnection isn't working properly.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4