I'm running CM 6.1 and IOS versoin 12.4(9)T7. Has anyone seen an issue where 7942 phones won't register with SRST but 7911's will? The phones register with CM frist, but when the T1 goes down, only the 7911's have thier DN, the 1942's are just blank. If I do a "show ephone" on the SRST router they show all the phones are registered, but it doesn't recognize the type 7942.
max-conferences 8 gain -6
ip source-address 10.10.5.1 port 2000 strict-match
You need SRST 4.1 to support the 79X2/5 phones, SRST 4.1 became available in IOS 12.4.14T, so 12.4.15T is your best bet. I would stay away from 12.4.15T5 and 6 as we have found critical dspware bugs, which are suppose to be fixed in T7, your safest bet is 12.4.15T4.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.