09-29-2014 01:28 PM - edited 03-17-2019 12:20 AM
I have a call manager with a VG224. I created a single line extension of 1999 as my nightbell. I am able to pickup the night bell from any display phone no problems. I want to be able to pickup the nightbell from a shop single line phone. Does anyone know the feature digits i need to dial in order to pickup the nightbell from a single line phone?
Solved! Go to Solution.
09-29-2014 02:37 PM
You can find SCCP supplementary codes here:
http://www.cisco.com/c/en/us/td/docs/ios/voice/fxs/configuration/guide/15_1/fxs_15_1_cg_book/fxssccpsplmft.html
Chris
09-29-2014 02:36 PM
What do you mean by single line phone? IP phone of analog phone? If IP, what model as all should support pickup groups, if analog is it SCCP controlled as that is the only protocol supporting supplementary features?
Chris
09-29-2014 02:37 PM
You can find SCCP supplementary codes here:
http://www.cisco.com/c/en/us/td/docs/ios/voice/fxs/configuration/guide/15_1/fxs_15_1_cg_book/fxssccpsplmft.html
Chris
09-29-2014 06:30 PM
Sorry what i mean by single line is Standard telephone.
**if analog is it SCCP controlled as that is the only protocol supporting supplementary features?**
This will do.
The factory floor is a dirty environment and the 7900's series phones would not last. Therefore i have to use the standard telephone.
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: