Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

pickup a nightbell from single line.

I have a call manager with a VG224.  I created a single line extension of 1999 as my nightbell.  I am able to pickup the night bell from any display phone no problems.  I want to be able to pickup the nightbell from a shop single line phone.  Does anyone know the feature digits i need to dial in order to pickup the nightbell from a single line phone?

 

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

You can find SCCP

You can find SCCP supplementary codes here:

http://www.cisco.com/c/en/us/td/docs/ios/voice/fxs/configuration/guide/15_1/fxs_15_1_cg_book/fxssccpsplmft.html

Chris

3 REPLIES
Hall of Fame Super Silver

What do you mean by single

What do you mean by single line phone? IP phone of analog phone? If IP, what model as all should support pickup groups, if analog is it SCCP controlled as that is the only protocol supporting supplementary features?

Chris

Hall of Fame Super Silver

You can find SCCP

You can find SCCP supplementary codes here:

http://www.cisco.com/c/en/us/td/docs/ios/voice/fxs/configuration/guide/15_1/fxs_15_1_cg_book/fxssccpsplmft.html

Chris

New Member

Sorry what i mean by single

Sorry what i mean by single line is Standard telephone.

**if analog is it SCCP controlled as that is the only protocol supporting supplementary features?**

This will do.

The factory floor is a dirty environment and the 7900's series phones would not last.  Therefore i have to use the standard telephone. 

Thanks

 

 

36
Views
0
Helpful
3
Replies
CreatePlease to create content