Planning to Migrate a CUCM 7.1 to a new CUCM 8.6 Cluster with Security turned on
I am currently planning a CUCM Migration from Version 7.1.5 to Version 8.6, on new Hardware. The old cluster has security turned on (CTL Client an E-Token). What makes more difficult is, we have to use the old Publisher as an centralized TFTP Server for both, the old 7.1.5 and the new 8.6 Cluster.
I thought it should be possible by doing it this way:
- Define the 8.6 TFTP-Server as alternate TFTP on the old Server
- Run the CTL-Client on the old Cluster and put the new TFTP Server in the CTL File
- Run the CTL-CLient on the new Cluster and add the old TFTP Server
- Configure the new Cluster with all Phones
- Delete the Phones on the old Cluster (Change MAC Add.)
But in this scenario the Phones would not register to the new Cluster?
Now i am looking for a strategy to configure it correctly. Any information and help is more than welcome.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...