Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

PLAR on ATA187

The Cisco ATA 187 Analog Telephone Adaptor Release Notes for Firmware Release 9.2(3) (SIP) states "

The 9.2(3) Firmware Release provides support for the One Touch Private Line Automatic Ringdown (PLAR) feature"

How do I configure this on the ATA187? Havn't been able to find any documentation.

7 REPLIES
Green

PLAR on ATA187

Hi,

What is the ATA 187 working with ?

CUCM etc

Regards

Alex

Regards, Alex. Please rate useful posts.

PLAR on ATA187

CUCM 8.6

Green

PLAR on ATA187

Hi,

Have a look at this link:-

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b03sdial.html

I think you need to add a SIP dial rule and add as PLAR

Regards

Alex

Regards, Alex. Please rate useful posts.

PLAR on ATA187

Yes I need a SIP Dial Rule but I dont understand how to configure the rules so the phone attached to the ATA dials automatically as soon as it goes offhook.

I've added a PLAR SIP Dial Rule but I still need to press at least one digit before it dials.

PLAR on ATA187

PLAR works fine on the ATA187 now :-)

I remebered wrong how to set this up and created a translation pattern trat was translating ! to the number I wanted to dial instead och creating a blank translation pattern trat was translating to the number I wanted to call.

New Member

PLAR on ATA187

Can you expand on the setup of the PLAR with the 187?

New Member

PLAR on ATA187

Hello

Could you give us the info about this???

TIA
Cristian.

1215
Views
5
Helpful
7
Replies
CreatePlease to create content