Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

PLAR sendind calling number

Hello, im quite new to voip world, so i have a rewarding and challenging

Job, there is my question.

I manage a little network, we have a few PSTN lines to our GW, some of these lines are "fowarded" to IP extensions within the network using PLAR but i cant get the caller number to be displayed in the ip phone

Any suggestions?

Thanks in advance

Cesar

2 REPLIES
Green

Re: PLAR sendind calling number

Hola Cesar,

First question is if you connect an analog phone do you recieve Caller ID from Telco?

Then enable caller id in voice ports by using caller-id enable command

http://www.cisco.com/en/US/docs/ios/12_3t/voice/command/reference/vrht_c4.html#wp1059594

Then you can post your config and run some debugs:

debug voice ccapi ino

debug vpm signal

Re: PLAR sendind calling number

Ok, I was supposing that i was receiving the information from telco but it was not right, thanks a lot for your help.

Cesar

96
Views
0
Helpful
2
Replies
CreatePlease login to create content