Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Please few steps on how to config a CCM 6.1.2

Hi guys,

I will need few steeps on how to setup a call manager 6.1.2 with a 2811 as a gateway. I'm very new with Call Manager and I have to finish this project till Friday. Please help me,

So I have:

1 - 2811 with 1MFT T1/E1 and 8 FXO

1 - 7816 server running Call Manager 6.1.2

What I have done:

- Installed call manager and uploaded the license files (500 seats, 200 units)

Thanks,

3 REPLIES
Cisco Employee

Re: Please few steps on how to config a CCM 6.1.2

Maintain and Operate Guides

http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html

download :

Cisco Unified Communications Manager Administration Guide, Release 6.1(1)

look at the GW config part, you do not mention which protocol you want to use so look at the appropriate doc

Configuration Examples and TechNotes

http://www.cisco.com/en/US/partner/tech/tk1077/tech_configuration_examples_list.html

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Please few steps on how to config a CCM 6.1.2

Thanks javalenc for the links.

I still am little bit confused with all the info that I have to read.

I will use MGCP as protocol for gateway.

But I don't know how to config the gateway. If someone can put a running config I will appreciate a lot.

I don't know if I must put the phone firmwares on the gateway CF, or what exactly I have to do.

I have some experience with Call Manager Express but I don't know what from that experiense to use.

Cisco Employee

Re: Please few steps on how to config a CCM 6.1.2

guess you only looked at one link since in here:

Configuration Examples and TechNotes

http://www.cisco.com/en/US/partner/tech/tk1077/tech_configuration_examples_list.html

there are a LOT of examples:

# Configure MGCP Gateway and FXO/FXS Ports on a Cisco CallManager Server

11/Jan/2007

# Configuring Cisco CallManager with IOS MGCP Gateways (Analog FXO, FXS Ports)

11/Jan/2007

# Configuring SRS Telephony and MGCP Fallback

12/Feb/2008

# Configuring the Cisco IOS MGCP Gateway

01/Nov/2006

# Hookflash Transfer in MGCP

02/Feb/2006

# How to Configure MGCP with Digital PRI and Cisco CallManager

did you checked any of those?????

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
417
Views
0
Helpful
3
Replies
CreatePlease to create content