Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Please help with the specks

Hi guys!

Please help come up with a viable spec for a cisco 2801 router that will connect to an ISDN PRI provider. We would then like to convert it to SIP so as to pass the traffic to astericks.

What licences and modules should be included in the specifications?

Regards,

fmo

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Please help with the specks

You need IOS Voice image, VWIC interface, and PVDM2-xx according to the number of desired channels.

3 REPLIES
Hall of Fame Super Gold

Please help with the specks

You need IOS Voice image, VWIC interface, and PVDM2-xx according to the number of desired channels.

New Member

Please help with the specks

Paolo hello,

If am using the CME just for the purpose of converting the E1 to SIP then forward to Astericks for dialpeers etc...do I require PVDM?

Hall of Fame Super Gold

Please help with the specks

Yes.

Configuring CME is not necessary.

Thank you for the nice rating and good luck!

112
Views
0
Helpful
3
Replies
CreatePlease to create content