Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Poblem in activating the bri interface

hello,

i have configured the bri interface earlier, and it worked fine.Today, when i want to do the same thing, the card is down

ISDN BRI0/1/1 interface

dsl 3, interface ISDN Switchtype = basic-net3

Layer 1 Status:

DEACTIVATED

Layer 2 Status:

TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED

Layer 3 Status:

0 Active Layer 3 Call(s)

Active dsl 3 CCBs = 0

The Free Channel Mask: 0x80000003

Total Allocated ISDN CCBs = 0

i have supposed that the problem comes from Telco, but i have plugged a phone behind the Telco modem, the call arrives.

thanks for help

1 REPLY
Hall of Fame Super Gold

Re: Poblem in activating the bri interface

May be this line doesn't have static tei so you need to remove that command. In that case, best is to use "isdn tei-negotiation preserve".

108
Views
0
Helpful
1
Replies
CreatePlease to create content