Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PoE on a HWIC-4ESW

I have a 2811, with an standard Power.

I want to install a HWIC2-4ESW with PoE.

Will PoE be activated?

2 REPLIES
Red

Re: PoE on a HWIC-4ESW

Standard power won't work.

You may use the command "show environment". If you see "AUX power", that's good for PoE.

Or you can look at the chassis. If you see something like, 2811-AC-IP, it should support PoE.

Michael

http://htluo.blogspot.com

New Member

Re: PoE on a HWIC-4ESW

sh environment

Main Power Supply is AC

Fan 1 OK
Fan 2 OK
Fan 3 OK

Fan Speed : Normal

System Temperature: 27 Celsius (normal)

Environmental information last updated 00:00:24 ago

Its not showing AUX power that means POE wont work....ok if POE doest work no problem i have alternate.....my q? is can i use this 4ports for switching if yes can any one guide me how to use them.....coz i tried but didnt worked..........thanks in advance.....

300
Views
0
Helpful
2
Replies